HWZ Forums

Login Register FAQ Mark Forums Read
HardwareZonePH on Facebook

Plextor Unveils M6e PCI Express SSD

Thread Tools
Old 22-04-2014, 05:08 PM   #1
Junior Member
AJQuerubin's Avatar
Join Date: Mar 2014
Posts: 54
Post Plextor Unveils M6e PCI Express SSD

In a few years, SSDs have gone being a storage option for specialist applications to a mainstream storage device found in many PCs. As the technology has progressed, high-performance drives such as Plextor's M5 Pro Xtreme are reaching the 6Gbps (600MBps) limits of the SATA Revision 3.0 interface commonly found on motherboards. The solution is to develop PCIe SSDs that use the same high bandwidth PCI Express bus as graphics cards. These new SSDs break through the SATA bottleneck and realize the potential of the latest components. Today we're going to look at PCIe and the advantage of PCIe SSDs.

Understanding PCIe

The PCI Express bus replaced a number of previous standards and was designed to be incredibly flexible. We're going to limit ourselves to the simple, possibly brightly colored slots that sit in the center of our motherboard and have a look at the more practical aspects of this standard. Most motherboards come with slots in a range of lengths, this indicates the number of parallel lanes that the slot can use to transfer the data and goes from x1 to x16. A PCIe card with a number of lanes can go in a slot with that number or more, so x2 card can go in a x2 slot or above. The larger slots are used by ultra-fast top-end graphics cards, the smaller ones by things that don't transfer much data like sound cards. How much each of these lanes transfers is dependent on the PCIe revision/generation (v1.X: 250MBps, v2.x: 500MBps, v3.0: 985MBps). Multiplying lane capacity by the number of lanes gives us a theoretical maximum speed for that slot. Cards are generally backward compatible and the PCIe is full-duplex (data goes both ways at one time, unlike SATA)

Using the PCIe Advantage for SSDs

What does PCIe mean for SSDs? Let's use Plextor's M6e PCIe SSD as an example, it's a x2 card so it fits in a 2 lane slot and it's compatible with generation 2 of PCIe. Most motherboards offer PCIe revision/generation 2 or three so this means that the slot it fits in could theoretically support 1GBps (2 times 500MBps); far more than SATA's 600MBps. Looking at the specifications, we can see that the SSD takes advantage of this with a 770MBps maximum sequential read speed, significantly faster than would be possible with SATA.

Evolution: Plug-and-play PCIe SSDs

PCIe SSDs aren't entirely new, but previous models often required proprietary drivers to operate making them inconvenient and creating compatibility issues. Plextor have solved this and managed to make the M6e PCIe is entirely plug-and-play. It conveniently uses the AHCI drivers already built into Windows and Linux. Plextor have also enabled the user to set the drive to be compatible with legacy BIOSs for booting on older systems and UEFI compatible for very fast boot times on new systems.

Evolution: Shrinking PCIe Card Sizes

The layout of some computer cases and smaller case designs call for PCIe cards to meet HHHL (Half-Height Half-Length) standard. Older PCIe SSDs tended to be full height and were unable to fit, Plextor's M6e uses a HHHL PCIe card making it suitable for any case.


Moving from SATA 6Gbps to PCIe is allowing a new generation of SSDs to reach amazing performance levels with the M6e leading the way. Through the work of Plextor engineers the limitations of previous PCIe SSD are fast disappearing.
AJQuerubin is offline   Reply With Quote

Thread Tools

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump